The heating controls in the house are Heatmiser Neo thermostats that have the capability of being used remotely via the Heatmiser App. A Heatmiser Neo Hub is required to plug into the house modem to enable the remote access.
Using the thermostats
The thermostats have 4 modes
Wake – first setting period of the day
Leave – when exiting the house in the mornings
Return – when returning back to the house for the evening
Sleep – when leaving the common areas and going to bed in the bedrooms
To set the thermostats select edit on the screen using the left and right keys and press the “tick” icon in the middle of the left and right keys (this is referred to as the OK button )
Go to wake and click OK and the time will flash so using the “UP” & “Down” buttons se the time and use OK to go through the hour and minute setting. Then the temperature will flash so set the temperature to your desired temperature for each mode. With the away settings lower than the settings when the house is occupied.
When finished click on done and the screen will return to show the current temperature and time and day.
The hot water timer is located in the utility room and is similar to the room thermostats except it does not display the room temperature . It displays “Timer on” or “Timer off” indicating the timers state .
The settings are the exact same as the room thermostats except the modes are numbered 1-4 and not named wake, leave, return & sleep.
For additional help there are Youtube videos showing how to set the thermostats on www.Heatmiser.co.uk